Bare Bones...


Iron-On Transfer


Wondering what to wear to the next locksport catchup?

Ready to brand one of your garments with our logo?

Add a free set of iron-on transfers to your next order on us 😉

* Limit one set per order *



  1. Set your iron to hottest setting (i.e. Linen) with STEAM OFF. Allow to reach full heat
  2. On a smooth hard surface, place the fabric and the transfer paper image side down
  3. Place a tea towel or similar over the transfer paper. Don’t place the iron directly on paper
  4. Firmly place iron on your transfer image. Hold for 10-15 seconds then lift and repeat process until entire image has been pressed.
  5. Wait 2-3 minutes for transfer to cool before peeling off backing in a smooth and even motion.
  6. Repeat heating/cooling process if transfer isn’t peeling off evenly or entirely



In stock





Additional information


3.5mm width to suit Pin tumbler lock, 4.1mm width to suit Dimple locks


There are no reviews yet.

Be the first to review “Iron-On Transfer”
Scroll to top